A Poulan chainsaw is a powerful tool that can help you tackle various projects around the home. From trimming branches to felling trees, a Poulan chainsaw can make quick work of whatever task you need it to. But before you can put your chainsaw to work, you need to know how to operate it safely and effectively.
In this article, we’ll take a look at the different features of a Poulan professional chainsaw and how to use them. We’ll also provide some tips on how to maintain your chainsaw and keep it in good working condition.
1. Check the oil level. The oil level should match the mark on the dipstick.
2. Check the chain tension. The chain should have some slack, but shouldn’t be loose.
3. Prime the chainsaw. Put your thumb over the primer button (usually located near the carburetor) and push it a few times.
4. Pull the starter cord. Put your other hand on the front handle and pull the cord slowly until you feel resistance. Then, pull the cord quickly and forcefully. The chainsaw should start.
Contents
Safety Measures to Start a Poulan Chainsaw
Chainsaws are one of the most useful tools that you can have in your arsenal, but they’re also one of the most dangerous. That’s why it’s important to take some basic safety precautions before you start using your chainsaw.
First, make sure you have the proper Personal Protective Equipment. That includes gloves, eye protection, and ear protection.
Next, check your chainsaw to make sure it’s in good working order. The chain should be properly tensioned and the bar should be lubricated.
Finally, when you’re ready to starting a Poulan chainsaw, be sure to use both hands. This will help you keep a firm grip on the saw and prevent it from slipping.
Now you’re ready to start your chainsaw. First, always keep the chainsaw bar and chain away from your body. Second, never cut above waist level. And finally, be sure to watch for kickback.
Kickback is when the chainsaw kicks back toward you, and it can happen if the saw gets pinched or if you hit a hidden branch. If you do experience kickback, let go of the saw and allow it to fall to the ground.
By following these basic safety precautions, you can help prevent accidents and injuries while using your chainsaw.
How to Start a Poulan Chainsaw: Step-By-Step Instructions
If you have ever used a chainsaw before, you know that it can be quite intimidating. Read the Owner’s Manual. Yes, this might seem like a no-brainer, but you’d be surprised how many people try to operate a chainsaw without even reading the owner’s manual. Every chainsaw is different, and the Poulan is no exception. Skipping this step could result in serious injury, so make sure you take the time to familiarize yourself with your chainsaw before you try to use it. If you have already read the instructions or still prefer to ignore them, here are brief step-by-step Poulan chainsaw starting instructions.
Step 1: Remove the bar cover
Remove the bar cover by loosening the two screws that hold it in place.
Step 2: Activate the chain brake
The chain brake is a safety feature that prevents the chain from rotating. On most Poulan chainsaws, the chain brake is activated by a lever located above the right-hand grip. This will help to prevent the chainsaw from accidentally starting while you’re preparing it.
Step 3: Move the choke lever
Next, locate the choke lever. This is usually located near the handle of the chainsaw. Now, push the choke lever into the “full” position.
Step 4: Turn the switch on
Turn the switch to the “On” position. The switch is located on the right-hand side of the chainsaw, near the right-hand grip.
Step 5: Depress the primer bulb
The primer bulb is located on the left-hand side of the chainsaw and is used to prime the engine with fuel. This will introduce fuel into the carburetor, making it easier to start the chainsaw.
Step 6: Position the chainsaw
The chainsaw should be positioned so that the bar is horizontal and the chain is not in contact with any objects.
Step 7: Pull the starter rope
The starter rope is located on the right-hand side and is used to start the engine. This will start the chainsaw. Once it’s started, let go of the starter rope and allow the chainsaw to warm up for a few minutes before using it.
What if the Poulan Chainsaw Won’t Start; Troubleshooting
If your tool won’t start, there’re a few things you can do to troubleshoot Poulan chainsaw.
Flooded engine
First, make sure the engine is flooded. If it’s, you’ll need to drain the excess fuel and then try starting the chainsaw again. If the engine isn’t flooded, the next thing to check is the fuel.
Bad fuel
Make sure you’re using fresh, high-quality fuel in the correct mixture for your chainsaw. If the fuel is bad or the mixture is incorrect, it can prevent it from starting.
Spark plug
Next, check the spark plug to see if it’s damaged or dirty. If it’s, clean or replace the spark plug and then try starting the chainsaw again. If the spark plug is fine, the next thing to check is the carburetor.
Clogged carburetor
Make sure the carburetor is clean and the jets are clear. If the carburetor is dirty or clogged, it can prevent the chainsaw from starting.
Spark arrestor
Finally, check the spark arrestor to see if it’s dirty or damaged. The spark arrestor is a screen that prevents sparks from exiting the muffler. If the spark arrestor is clean, put it back on and try starting the chainsaw again.
Ignition coil
If you’ve checked all of these things and the Poulan chainsaw wont start, it’s possible that the ignition coil is damaged. The ignition coil is responsible for generating the spark that ignites the fuel.
FAQ
Why are chainsaws so hard to start?
Chainsaws are notoriously difficult to start, and there are a few reasons why. First, chainsaws have a lot of power and compression, so it takes a lot of effort to pull the starter cord. Second, the spark plug can get fouled up, making it harder to create a spark. Finally, if the chainsaw is old or has been sitting for a while, the carburetor can get gummed up, making it difficult for the engine to start.
How to clean carburetor on Poulan pro chainsaw?
A carburetor is a critical part of a chainsaw, and it needs to be cleaned regularly to prevent sawdust and debris from clogging it up. The first step in cleaning a carburetor is to remove the air filter and spark plug. Next, use a carburetor cleaner to clean the inside of the carburetor, being careful not to damage any of the delicate parts. Finally, reassemble the chainsaw and test it to make sure it’s working properly.
How to turn on a Poulan chainsaw?
Before starting the chainsaw, make sure that the area around you is clear of obstacles. It’s also important to check that the saw is properly lubricated and the chain is not damaged. First, pull the choke lever to the “full” position. This enriches the fuel mixture and makes it easier to start the engine. Next, press the primer bulb several times until you see fuel in the carburetor. Next, pulled slowly on the starter cord until you feel resistance. After that, pull the cord rapidly to start the engine.
Conclusion
Poulan chainsaws are popular with many people because they’re known for their durability and ease of use. If you have never started a Poulan chainsaw before, it is important to know how to do it correctly. By following just a few simple steps in this article, you can get your chainsaw up and running in no time.
Now that you know how to start a Poulan chainsaw, we hope, you’re ready to tackle any job that comes your way.
Also read:
References:
- Personal Protective Equipment (U.S. Department Of Labor): https://www.osha.gov/personal-protective-equipment
- Wikipedia (Chainsaw safety features): https://en.wikipedia.org/wiki/Chainsaw_safety_features
- Spark Plug (Britannica): https://www.britannica.com/technology/spark-plug
“A good tool stays with you for many years and choosing carefully ensures the job is done right, your work is neat, and the tool is always a pleasure to use”
